Dell C9000 Line Cards Networking C9010 Getting Started Guide - Page 27
Installing a Fan Module, modules must always be installed and operating properly.
View all Dell C9000 Line Cards manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
2. Attach a grounding cable to the chassis lug by inserting a 6-gauge cable (item 1 in Figure 18). Using a hand-crimping tool (Tyco Electronics 58433-3 or equivalent), crimp the lug (item 2 in Figure 18) so that the cable is held securely. Figure 18. Grounding the Chassis 3. Connect the opposite end of the grounding cable to the nearest grounding post at your site. Installing a Fan Module The C9010 switch requires three fan modules for normal operation. Three field-replaceable fan modules are shipped with the base configuration. To ensure proper temperature and airflow control, the three fan modules must always be installed and operating properly. NOTE: If a fan fails, replace the fan module within two minutes to avoid a shutdown of installed line cards. Installing the Hardware 27