Dell C9000 Line Cards Networking C9010 Getting Started Guide - Page 40
x10G Port Link/Activity LEDs above each, Color / Description
View all Dell C9000 Line Cards manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
LED Color / Description RJ-45 Management • Ethernet port: Link LED • (left LED below port) • Off - No data link activity Solid green - Link is up and operating at maximum port speed; if autonegotiated, port is operating at 1G. Solid amber - Link is up and operating at lower speed; if auto-negotiated, port is operating at 10/100M. RJ-45 Management Ethernet port: Activity LED (right LED below port) • Off - No data link activity • Flashing green - Link is up and transmitting/receiving data. Figure 28. 40GbE QSFP+ Port LEDs 1. 4x10G Port Link/Activity LEDs above each 40GbE QSFP+ port Table 3. 40GbE QSFP+ Port LEDs 2. Module LED LED Color / Description 40GbE Port Link/ • Off - No link or interface is disabled. Activity LED • Solid green - 40G link is up and 40GbE QSFP+ interface is enabled. (leftmost LED) • Flashing green - 40GbE port is transmitting/receiving data at maximum 40G speed. • Solid amber - 40G link is up but operating at lower speed (less than 40G). • Flashing amber - 40GbE port is transmitting/receiving data at a lower speed (less than 40G). • Flashing amber (1 second on, 1 second off) - Port beacon used to locate port 4x10G Port Link/ • Off - No link or interface is disabled. Activity LED • Solid amber - 10G link is up and operating at 10G speed. • Flashing amber - 4x10G port is transmitting/receiving data at 10G speed. • Flashing amber (1 second on, 1 second off) - Port beacon used to locate port Module/Location • Off - No power LED • Solid green - Normal operation • Flashing blue - Beacon LED is being used to locate the module. 40 Installing the Hardware