Dell Dimension 4100 Dell Dimension 4100 System Solutions Guide - Page 56
Adding Other Drives
View all Dell Dimension 4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
www.dell.com | support.dell.com HINT: You need additional hardware, such as a mounting kit, to install a 3.5-inch drive in a 5.25-inch bay. Adding Other Drives Your computer includes a floppy drive and either a CD or DVD drive. You can add drives, such as Zip drives and CD-RW drives, using the procedures in the following sections. 5.25-Inch Devices CAUTION: Before you begin any of the procedures in this section, follow the safety instructions on page 7. NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network jack. 1 Turn off the computer and devices, and disconnect them from their electrical outlets. 2 Briefly press the power button. Pressing the power button when the computer is not connected to an electrical outlet discharges residual electricity and can help prevent system board damage. 3 Remove the computer cover (see page 42). 4 Press in the tabs, and swing the front panel away from the computer. 56 Adding Parts