Dell Dimension 4100 Dell Dimension 4100 System Solutions Guide - Page 81
Locate the battery socket see and pry the battery out of its - restore
View all Dell Dimension 4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
If you have to repeatedly reset time and date information after turning on the computer, replace the battery. CAUTION: A new battery can explode if it is incorrectly installed. Replace the 3-V CR2032 battery only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer's instructions. 1 Record all the screens in the system setup program so that you can restore the correct settings in step 6. 2 Remove the computer cover (see page 42). NOTICE: To avoid damage to the system board while you pry the battery loose, be sure to insert the plastic screwdriver between the battery and the socket (not the system board). 3 Locate the battery socket (see page 44) and pry the battery out of its socket with your fingers or with a plastic screwdriver. 4 Insert the battery into the socket with the side labeled "+" facing up. battery socket (BATTERY) battery 5 Replace the computer cover (see page 71), and plug your computer and devices into their electrical outlets. 6 Access the system setup program and restore the settings you recorded in step 1. Appendix 81