Dell Force10 E600i Quick Start Guide - Page 8
Installing the Chassis in a Two-Post Rack, front shipping cover. Tighten the screws.
View all Dell Force10 E600i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Step Task 3 Attach the bar to the equipment rack brackets using the mounting screws provided by the rack manufacturer. Installing the Chassis in a Two-Post Rack Step Task 1 If you are center or rear mounting the chassis in a 19-inch rack, make sure that the mounting brackets are properly positioned. If your are mounting the chassis in a 23-inch rack, install the 23-inch adapters. 2 Using a hand cart, pallet jack, or forklift, align the rack-mount holes with the equipment rack holes, situating the chassis on top of the equipment rack shelf bar. 3 Insert rack mounting screws in the holes that are not obscured by the front shipping cover. Tighten the screws. 4 Loosen and remove the screws attaching the front shipping cover. Remove the cover. 5 Insert the remaining rack mounting screws and tighten to secure the chassis in the rack. 6 Installing the Hardware