Dell Force10 E600i Quick Start Guide - Page 9
Attach a Ground Cable to the Chassis, Installing E300 Chassis into Rack
 |
View all Dell Force10 E600i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
FN00046d Installing E300 Chassis into Rack Installing E600i and 1200i into Rack Attach a Ground Cable to the Chassis NOTE: The rack installation ears are not suitable for grounding. CAUTION: Grounding conductors must be made of copper. Do not use aluminum conductors. NOTE: Coat the lugs with an anti-oxidant compound prior to crimping. Bring any un-plated mating surfaces to a shiny finish, and coat with an anti-oxidant prior to mating. Plated mating surfaces must be clean and free from contamination. WARNING: You must complete the ground connection before proceeding with the DC PEM installation. It is also recommended that you complete the grounding before connecting the AC PSU power. Installing the Hardware 7
-
1 -
2
-
3
-
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
 |
 |
Installing the Hardware
7
Installing E300 Chassis into Rack
Installing E600i and 1200i into Rack
Attach a Ground Cable to the Chassis
NOTE:
The rack installation ears are not suitable for grounding.
CAUTION: Grounding conductors
must
be made of copper. Do not use
aluminum conductors.
NOTE:
Coat the lugs with an anti-oxidant compound prior to crimping. Bring any
un-plated mating surfaces to a shiny finish, and coat with an anti-oxidant prior to
mating. Plated mating surfaces must be clean and free from contamination.
WARNING: You must complete the ground connection before proceeding
with the DC PEM installation. It is also recommended that you complete the
grounding before connecting the AC PSU power.
FN00046d