Dell Force10 S25N-S50N Installing S50N and S50V Systems - Page 21
Four-Post Rack-mounting with Cage Nuts,
View all Dell Force10 S25N-S50N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Step Task 3 Set the adjustable rear mounting bracket to the length (one of three lengths) for your bracket. Secure the length with the four screws. Figure 4-2. Four-post Rack-mounting with Adjustable Rear-mounting Brackets fn00148s50V Four-Post Rack-mounting with Cage Nuts Ensure that there is adequate clearance surrounding the cabinet or rack to permit access and airflow. If you are installing two S-Series systems side-by-side, position them at least 5 inches (12.7 cm) apart. Follow the steps below to install the unit into a four-post rack mounting with cage nuts. Step Task 1 Attach the two rear brackets to the side panels. Align the three holes in the bracket with the three holes on the chassis, and secure the brackets to the chassis using the screws. Top View of Brackets 2 Align and secure the adjustable bracket onto the rear bracket. fn00147f_s50V Align brackets Installing the Switch | 21