Dell Force10 S25N-S50N Installing S50N and S50V Systems - Page 32
Connecting the S50V DC-to-DC Cable, Twinning Plate Oriented over Two PSUs
View all Dell Force10 S25N-S50N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
www.dell.com | support.dell.com Step Task 2 Join the two units with the supplied twinning plate (the small, flat, I-beam-shaped metal adapter with four screw holes), using two screws on each side of the plate through the front inside corners of the two switches. Orient the adapter with the cross-bars of the I-beam horizontally, so that the fan and power LEDs in the left-hand PSU are not obscured. Figure 5-5. Twinning Plate Oriented over Two PSUs Power Fan 3 As shown on the left side of Figure 5-6, attach the rack ears to the rack with the supplied screws or cage nuts, depending on the style of your rack. Figure 5-6. Two PSUs Mounted Side-by-Side Connecting the S50V DC-to-DC Cable The PSU kit for the S50V includes two power cables - the cable that connects the PSU to the AC source and the DC-DC cable that connects the PSU to the terminal block on the back of the S50V. The DC-DC cable length is 1.5 meter (5 feet), with a keyed plug connector at one end that connects to the PSU, and, at the other end, individual wires that connect to the DC terminal leads in the rear of the S50V (Figure 5-7). 32 | Installing Backup Power