Dell Force10 S50-01-GE-48T FTOS 8.4.2.6 Command Line Reference Guide for the E - Page 1078

www.dell.com | support.dell.com Parameters bgp as number connected static metric metric-value metric-type type-value route-map map-name tag tag-value Enter the keyword bgp followed by the autonomous system number. Range: 1 to 65535 Enter the keyword connected to redistribute routes from physically connected interfaces. Enter the keyword static redistribute manually configured routes. Enter the keyword metric followed by the metric value. Range: 0 to 16777214 Default: 20 (OPTIONAL) Enter the keyword metric-type followed by the OSPFv3 link state type of 1 or 2 for default routes. The values are: 1 = Type 1 external route 2 = Type 2 external route Default: 2 (OPTIONAL) Enter the keyword route-map followed by the name of an established route map. If the route map is not configured, the default is deny (to drop all routes). (OPTIONAL) Enter the keyword tag to set the tag for routes redistributed into OSPFv3. Range: 0 to 4294967295 Default: 0 Default Not configured. Command Modes ROUTER OSPFv3 Command History Version 7.8.1.0 Version 7.4.1.0 Added support for C-Series Introduced Usage To redistribute the default route (x:x:x:x::x), configure the default-information originate command. Information Related Commands default-information originate Configure default external route into OSPFv3 router-id c e Designate a fixed router ID. Syntax router-id ip-address To return to the previous router ID, use the no router-id ip-address command. Parameters ip-address Enter the router ID in the dotted decimal format. Defaults The router ID is selected automatically from the set of IPv4 addresses configured on a router Command Modes ROUTER OSPF 1078 | Open Shortest Path First (OSPFv2 and OSPFv3)