Dell Force10 S50-01-GE-48T FTOS 8.4.2.6 Command Line Reference Guide for the E - Page 1420

www.dell.com | support.dell.com bpdu-destination-mac-address c s Use the Provider Bridge Group address in Spanning Tree or GVRP PDUs. Syntax bpdu-destination-mac-address [stp | gvrp] provider-bridge-group Parameters stp gvrp Force STP, RSTP, and MSTP to use the Provider Bridge Group address as the destination MAC address in its BPDUs. Forces GVRP to use the Provider Bridge GVRP Address as the destination MAC address in its PDUs. Defaults The destination MAC address for BPDUs is the Bridge Group Address. Command Modes CONFIGURATION Command History Version 8.2.1.0 Introduced on C-Series and S-Series. bridge-priority c e s Set the bridge priority of the switch in an IEEE 802.1D Spanning Tree. Syntax bridge-priority {priority-value | primary | secondary} To return to the default value, enter no bridge-priority. Parameters priority-value primary secondary Enter a number as the bridge priority value. Range: 0 to 65535. Default: 32768. Enter the keyword primary to designate the bridge as the root bridge. Enter the keyword secondary to designate the bridge as a secondary root bridge. Defaults priority-value = 32768 Command Modes SPANNING TREE (The prompt is "config-stp".) Command History Version 7.7.1.0 Version 7.5.1.0 pre-Version 6.2.1.1 Introduced on S-Series Introduced on C-Series Introduced on E-Series debug spanning-tree c e s Enable debugging of Spanning Tree Protocol and view information on the protocol. Syntax debug spanning-tree {stp-id [all | bpdu | config | events | exceptions | general | root] | protocol} To disable debugging, enter no debug spanning-tree. 1420 | Spanning Tree Protocol (STP)