Dell Force10 S50-01-GE-48T FTOS 8.4.2.6 Command Line Reference Guide for the E - Page 1567

show hardware fpc forward ex Display receive and transmit counters, error counters and status registers for the forwarding functional area of the FPC (flexible packet classification engine). Syntax show hardware linecard number port-set pipe-number fpc forward {counters | drops | spi {err-counters | spichannel# counters} | status} Parameters linecard number port-set pipe-number counters drops spi err-counters spi spichannel# counters status Enter the keyword linecard followed by the line card slot number. Range: 0 to 13 on E1200, 0 to 6 on E600/E600i, and 0 to 5 on E300 Enter the keyword port-set followed by the number of the line card's Port-Pipe. Range: 0 to 1 (OPTIONAL) Enter the keyword counters to display the FPC receive and transmit packet, byte counters, and error counters. (OPTIONAL) Enter the keyword drops to display FPC drop-related error counters. (OPTIONAL) Enter the keywords spi err-counters to display the FPC System Packet Interface (SPI) receive and transmit packet, byte counters, error counters, and key status registers on the ingress and egress paths. (OPTIONAL) Enter the keywords spi spichannel# counters to display the FPC System Packet Interface level 4 (SPI4) counters. (OPTIONAL) Enter the keywords status to display FPC status registers. Defaults No default values or behavior Command Modes EXEC EXEC Privilege Command History Version 8.1.1.2 Version 8.1.1.0 Introduced on E-Series ExaScale E600i Introduced on E-Series ExaScale E1200i E-Series ExaScale Debugging and Diagnostics | 1567