Dell Force10 S50-01-GE-48T FTOS 8.4.2.6 Command Line Reference Guide for the E - Page 1250

www.dell.com | support.dell.com Usage IS-IS is not supported on S-Series systems. Information redistribute ospf c e s Redistribute routing information from an OSPF process. Syntax redistribute ospf process-id [match external {1 | 2} | match internal | metric metric-value] [route-map map-name] To disable redistribution, enter no redistribute ospf process-id [match external {1 | 2} | match internal | metric metric-value] [route-map map-name] command. Parameters process-id match external {1 | 2} match internal metric metric-value route-map map-name Enter a number that corresponds to the OSPF process ID to be redistributed. Range: 1 to 65355. (OPTIONAL) Enter the keywords match external followed by the numbers 1 or 2 to indicated that external 1 routes or external 2 routes should be redistributed. (OPTIONAL) Enter the keywords match internal to indicate that internal routes should be redistributed. (OPTIONAL) Enter the keyword metric followed by a number as the metric value. Range: 0 to16 (OPTIONAL) Enter the keyword route-map followed by the name of a configured route map. Defaults Not configured. Command Modes ROUTER RIP Command History Version 7.8.1.0 Version 7.6.1.0 pre-Version 6.2.1.1 Introduced on S-Series Introduced on C-Series Introduced on E-Series router rip c e s Enter the ROUTER RIP mode to configure and enable RIP. Syntax router rip To disable RIP, enter no router rip. Defaults Disabled. Command Modes CONFIGURATION Command History Version 7.8.1.0 Version 7.6.1.0 pre-Version 6.2.1.1 Introduced on S-Series Introduced on C-Series Introduced on E-Series 1250 | Router Information Protocol (RIP)