Dell Latitude 7212 Rugged Extreme Tablet Latitude 12 Rugged Extreme Tablet - 7 - Page 16
Inserting the uSIM, Display assembly, Removing display assembly
View all Dell Latitude 7212 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Inserting the uSIM 1 Remove the leftbattery 2 To insert the uSIM: a Lift the latch and remove the SIM slot cap. b Insert the SIM in the slot until it is locked. NOTE: Ensure the gold chip is facing down in the slot. c Press the SIM slot cap to initial state. 3 Follow the procedure in After working inside your computer. Display assembly Removing display assembly 1 Follow the procedure in Before working inside your computer. 2 Remove the: a Battery 3 To remove the display assembly (with plastic scribe): a Place the display side of system on a smooth flat surface. b Remove the screws (19) that secures the display panel to the tablet. 4 Flip the system so that the display assembly is at top view. 16 Removing and installing components
Inserting the uSIM
1
Remove the left
battery
2
To insert the uSIM:
a
Lift the latch and remove the SIM slot cap.
b
Insert the SIM in the slot until it is locked.
NOTE:
Ensure the gold chip is facing down in the slot.
c
Press the SIM slot cap to initial state.
3
Follow the procedure in
After working inside your computer
.
Display assembly
Removing display assembly
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
Battery
3
To remove the display assembly (with plastic scribe):
a
Place the display side of system on a smooth
flat
surface.
b
Remove the screws (19) that secures the display panel to the tablet.
4
Flip the system so that the display assembly is at top view.
16
Removing and installing components