Dell Latitude 7212 Rugged Extreme Tablet Latitude 12 Rugged Extreme Tablet - 7 - Page 30
Installing micro serial port and power connector port, Front camera, Removing front camera
View all Dell Latitude 7212 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Power connector port and micro serial port are assembled as one single component to connect on the tablet system board. NOTE: Malfunction of either component requires to remove both power connector port and micro serial port. Installing micro serial port and power connector port 1 Insert the power connector port and micro serial port into the slot on the chassis. 2 Align the metal brackets that secure the ports on the system chassis. NOTE: The USB-C port bracket is followed by the micro serial port bracket, as the micro serial port bracket sits on top of the USB-C port bracket with screw (1). 3 Replace the screws (5) to secure the micro serial port and power connector port to the chassis. 4 Align the rubber bracket and push to slide in the channel . NOTE: Rubber bracket ensures to secure the micro serial port cable from damage. 5 Insert the micro serial port cable into the connector. 6 Close the latch to secure the micro serial port cable to the system board. 7 Align the power connector port cable to the system board and affix the ground wire with the screw (1) to the system board. 8 Install the: a Display assembly b Battery 9 Follow the procedure in After working inside your computer. Front camera Removing front camera 1 Follow the procedure in Before working inside your computer. 2 Remove the: a Battery b Display assembly 3 To remove the front camera: a Place the back side of system on a flat surface. 30 Removing and installing components