Dell Latitude 7212 Rugged Extreme Tablet Latitude 12 Rugged Extreme Tablet - 7 - Page 39

Installing system fan

Get Dell Latitude 7212 Rugged Extreme Tablet PDF manuals and user guides View all Dell Latitude 7212 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

a Battery b Display assembly c Heat sink 3 To remove the system fan: a Locate the system fan. b Release the cable that connects the system fan on the system board with a plastic scribe [1]. NOTE: Push the bulge edge of the system fan connector by a plastic scribe. c Remove the speaker cable from the routing channel [2]. CAUTION: Ensure to unroute the cable, to avoid damaging the cable and cable connector. d Remove the screws (4) that secure the system fan on the system board [3]. Installing system fan 1 Align the system fan in the slot on the system chassis. 2 Route the speaker cable through the routing channel. 3 Replace the screws (4) to secure the system fan to the tablet chassis. 4 Connect the system fan cable to the system board. 5 Install the: a Heat sink b Display assembly c Battery 6 Follow the procedure in After working inside your computer. Removing and installing components 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
a
Battery
b
Display assembly
c
Heat sink
3
To remove the system fan:
a
Locate the system fan.
b
Release the cable that connects the system fan on the system board with a plastic scribe [1].
NOTE:
Push the bulge edge of the system fan connector by a plastic scribe.
c
Remove the speaker cable from the routing channel [2].
CAUTION:
Ensure to unroute the cable, to avoid damaging the cable and cable connector.
d
Remove the screws (4) that secure the system fan on the system board [3].
Installing system fan
1
Align the system fan in the slot on the system chassis.
2
Route the speaker cable through the routing channel.
3
Replace the screws (4) to secure the system fan to the tablet chassis.
4
Connect the system fan cable to the system board.
5
Install the:
a
Heat sink
b
Display assembly
c
Battery
6
Follow the procedure in
After working inside your computer
.
Removing and installing components
39