Dell Latitude 7212 Rugged Extreme Tablet Latitude 12 Rugged Extreme Tablet - 7 - Page 23
WWAN card, Removing WWAN card
View all Dell Latitude 7212 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
NOTE: Ensure that the metal pin is downwards towards the slot on the system board, and an angle LESS than 30° is maintained. 2 Connect the WLAN cables to the connectors on the WLAN card. NOTE: Ensure that cables are aligned straight and gently press on the top to fit the cable copper head on WLAN card button pin. 3 To secure the WLAN card, place the antenna bracket and tighten the M2.0 x 3.0 screw. 4 Install the: a Display assembly b Battery 5 Follow the procedure in After working inside your computer. WWAN card Removing WWAN card 1 Follow the procedure in Before working inside your computer. 2 Remove the: a Battery b Display assembly 3 To remove the WWAN card: a Place the back side of system on a flat surface. b Locate the WWAN card. c Remove the screw that secures the WWAN bracket to the system board [1]. d Lift the metal bracket [2] from the system board. e Disconnect main and auxiliary cables [3] with a plastic scribe from the connector on the WWAN card. NOTE: Insert the edge of the plastic scribe between the tiny gap of cable copper head and WWAN card button pin. f Slide and lift the WWAN card from the slot on the system board [4]. NOTE: Ensure to lift the WWAN card by an angle NOT more than 35°. CAUTION: Never touch the metal pins or the circuit with bare hands. Touch at the side of the WWAN card. Removing and installing components 23