Dell Latitude 7212 Rugged Extreme Tablet Latitude 12 Rugged Extreme Tablet - 7 - Page 44
the copper shield by more than, Metal bracket are secured with 5 screws. Lift both the brackets.
View all Dell Latitude 7212 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
CAUTION: Speaker cable is accessible after you remove the pogo pin docking connector cable. Ensure to remove pogo pin docking cable before removing speaker cable. 4 To remove the system board: a Remove the screw (1) that connects the antennas for radio pass-through connectors on the system board [1]. b Flip the connector upward [2]. NOTE: Avoid peeling off the copper shield, and ensure not to flap the copper shield by more than 75°. c Disconnect the antennas for radio pass-through connectors cable on the system board with a plastic scribe [3]. d Remove the screws (5) that secures the micro serial port, and USB Type-C port metal bracket [4]. e Lift the metal bracket from the system chassis [5]. NOTE: Metal bracket are secured with 5 screws. Lift both the brackets. 44 Removing and installing components