Dell Latitude 7212 Rugged Extreme Tablet Latitude 12 Rugged Extreme Tablet - 7 - Page 33
Installing front camera
View all Dell Latitude 7212 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Installing front camera 1 Align the front camera circuit board over the camera chassis. NOTE: Opposite side of the camera circuit board is placed to connect cable in the connector. 2 Connect the front camera cable and plug in the cable to the connector. 3 Flip the front camera circuit board, and align front camera circuit board with screw hole. 4 Align the camera lens case to the camera placeholder. 5 Replace the screw to secure the front camera circuit board on the system board. 6 Slide the lens shutter in the lens channel and push towards left. 7 Install the: a Display assembly b Battery 8 Follow the procedure in After working inside your computer. Removing and installing components 33
Installing front camera
1
Align the front camera circuit board over the camera chassis.
NOTE:
Opposite side of the camera circuit board is placed to connect cable in the connector.
2
Connect the front camera cable and plug in the cable to the connector.
3
Flip the front camera circuit board, and align front camera circuit board with screw hole.
4
Align the camera lens case to the camera placeholder.
5
Replace the screw to secure the front camera circuit board on the system board.
6
Slide the lens shutter in the lens channel and push towards left.
7
Install the:
a
Display assembly
b
Battery
8
Follow the procedure in
After working inside your computer
.
Removing and installing components
33