Dell Latitude 7212 Rugged Extreme Tablet Latitude 12 Rugged Extreme Tablet - 7 - Page 37

PCIe Solid State Drive (SSD), Removing PCIe Solid State Drive - SSD

Get Dell Latitude 7212 Rugged Extreme Tablet PDF manuals and user guides View all Dell Latitude 7212 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

NOTE: Ensure the SSD card in connected in the slot on the system board. NOTE: Do ensure thermal pad is applied in the heatsink and the heatsink is not damaged. If the heatsink is reused, ensure not to damage while removal. 2 Replace the screws (4) to secure the heatsink to the tablet chassis. 3 Install the: a Display assembly b Battery 4 Follow the procedure in After working inside your computer. PCIe Solid State Drive (SSD) Removing PCIe Solid State Drive - SSD 1 Follow the procedure in Before working inside your computer. 2 Remove the: a Battery b Display assembly c Heat sink 3 To remove the SDD: a Place the back side of system on a flat surface. b Locate the SSD. c Remove the screws (1) that secures the SSD on the system board [1]. d Slide and lift the SSD card from the connector on the system board [2]. NOTE: Ensure to lift the SSD card by an angle NOT more than 30°. Removing and installing components 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
NOTE:
Ensure the
SSD card
in connected in the slot on the system board.
NOTE:
Do ensure thermal pad is applied in the heatsink and the heatsink is not damaged. If the heatsink is reused, ensure
not to damage while removal.
2
Replace the screws (4) to secure the heatsink to the tablet chassis.
3
Install the:
a
Display assembly
b
Battery
4
Follow the procedure in
After working inside your computer
.
PCIe Solid State Drive (SSD)
Removing PCIe Solid State Drive - SSD
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
Battery
b
Display assembly
c
Heat sink
3
To remove the SDD:
a
Place the back side of system on a
flat
surface.
b
Locate the SSD.
c
Remove the screws (1) that secures the SSD on the system board [1].
d
Slide and lift the SSD card from the connector on the system board [2].
NOTE:
Ensure to lift the SSD card by an angle NOT more than 30°.
Removing and installing components
37