Dell Latitude 7212 Rugged Extreme Tablet Latitude 12 Rugged Extreme Tablet - 7 - Page 47
Installing docking board
View all Dell Latitude 7212 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
c Heat sink d System fan e WLAN f WWAN g System board 3 To remove the docking board: a Remove the adhesive tape that secures the docking circuit board on the system chassis [1]. b Remove the screws (4) that secures the docking circuit board on the system board chassis [2]. NOTE: As the docking board is positioned beneath the system motherboard, ensure to remove the system motherboard, to replace a faulty docking board. c Lift the latch, and slide to remove the docking board cable on the system board [3]. Ensure to remove all components, to resolve issues in bottom base assembly when troubleshooting issues not resolved by replacing the FRU-CRU components. Installing docking board 1 Connect the docking board cable to the connector. NOTE: Slide the cable through the connector clips and release the latch. 2 Align the docking board with the screw holes on the tablet chassis. 3 Replace the screws (4) to secure the back docking board to the tablet chassis. 4 Ensure to replace the adhesive tape to secure the docking board to the system chassis. Removing and installing components 47