Dell Latitude 7230 Rugged Extreme Tablet Service Manual - Page 17
Subscriber Identification Module (SIM) card, Removing the uSIM
View all Dell Latitude 7230 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Steps 1. Align the pins on the battery with the connector on the tablet. NOTE: Ensure that the metal pin of the battery is aligned in place. 2. Place the battery into the battery bay until it clicks into place. 3. Slide the battery latch to the locked state. 4. Ensure that the battery release latch is in the locked state. Next steps 1. Follow the procedure in after working inside your tablet. Subscriber Identification Module (SIM) card Removing the uSIM Prerequisites 1. Follow the procedure in before working inside your tablet. 2. Remove the batteries. Removing and installing components 17
Steps
1.
Align the pins on the battery with the connector on the tablet.
NOTE:
Ensure that the metal pin of the battery is aligned in place.
2.
Place the battery into the battery bay until it clicks into place.
3.
Slide the battery latch to the locked state.
4.
Ensure that the battery release latch is in the locked state.
Next steps
1.
Follow the procedure in
after working inside your tablet
.
Subscriber Identification Module (SIM) card
Removing the uSIM
Prerequisites
1.
Follow the procedure in
before working inside your tablet
.
2.
Remove the
batteries
.
Removing and installing components
17