Dell Latitude 7230 Rugged Extreme Tablet Service Manual - Page 61

USB/HDMI door, Removing the USB/HDMI door

Get Dell Latitude 7230 Rugged Extreme Tablet PDF manuals and user guides View all Dell Latitude 7230 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

Steps 1. Adhere the coin-cell battery to the slot on the system board. 2. Route the coin-cell battery cable through the routing guides along the left side of the system board. 3. Connect the coin-cell battery cable to the connector on the system board. 4. Connect the USB/HDMI port cable to the connector on the system board. 5. Align the screw holes on the USB/HDMI port bracket with the screw holes on the system board. 6. Replace the two screws (M2x3) to secure the USB/HDMI port bracket in place. Next steps 1. Install the back-cover assembly. 2. Install the batteries. 3. Install the handle (for models shipped with handle). 4. Install the stylus. 5. Follow the procedure in after working inside your tablet. USB/HDMI door Removing the USB/HDMI door Prerequisites 1. Follow the procedure in before working inside your tablet. 2. Remove the stylus. 3. Remove the handle (for the models shipped with a handle). 4. Remove the batteries. 5. Remove the back-cover assembly. About this task The figure indicates the location of the USB/HDMI door and provides a visual representation of the removal procedure. Removing and installing components 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
Steps
1.
Adhere the coin-cell battery to the slot on the system board.
2.
Route the coin-cell battery cable through the routing guides along the left side of the system board.
3.
Connect the coin-cell battery cable to the connector on the system board.
4.
Connect the USB/HDMI port cable to the connector on the system board.
5.
Align the screw holes on the USB/HDMI port bracket with the screw holes on the system board.
6.
Replace the two screws (M2x3) to secure the USB/HDMI port bracket in place.
Next steps
1.
Install the
back-cover assembly
.
2.
Install the
batteries
.
3.
Install the
handle
(for models shipped with handle).
4.
Install the
stylus
.
5.
Follow the procedure in
after working inside your tablet
.
USB/HDMI door
Removing the USB/HDMI door
Prerequisites
1.
Follow the procedure in
before working inside your tablet
.
2.
Remove the
stylus
.
3.
Remove the
handle
(for the models shipped with a handle).
4.
Remove the
batteries
.
5.
Remove the
back-cover assembly
.
About this task
The figure indicates the location of the USB/HDMI door and provides a visual representation of the removal procedure.
Removing and installing components
61