Dell Latitude 7230 Rugged Extreme Tablet Service Manual - Page 41
Installing the USB/HDMI port
View all Dell Latitude 7230 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Steps 1. Peel the conductive tape from the USB/HDMI port. 2. Remove the two screws (M2x3) that secure the USB/HDMI port bracket in place. 3. Remove the USB/HDMI port bracket away from the tablet. 4. Disconnect the USB/HDMI port cable from the connector on the system board. 5. Remove the single screw (M2x5) that secures the USB/HDMI port to the tablet. 6. Remove the USB/HDMI port away from the tablet. Installing the USB/HDMI port Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The figure indicates the location of the USB/HDMI port and provides a visual representation of the installation procedure. Removing and installing components 41
Steps
1.
Peel the conductive tape from the USB/HDMI port.
2.
Remove the two screws (M2x3) that secure the USB/HDMI port bracket in place.
3.
Remove the USB/HDMI port bracket away from the tablet.
4.
Disconnect the USB/HDMI port cable from the connector on the system board.
5.
Remove the single screw (M2x5) that secures the USB/HDMI port to the tablet.
6.
Remove the USB/HDMI port away from the tablet.
Installing the USB/HDMI port
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the USB/HDMI port and provides a visual representation of the installation procedure.
Removing and installing components
41