Dell Latitude 7230 Rugged Extreme Tablet Service Manual - Page 42
Adhere the conductive tape to the USB/HDMI port., Install
View all Dell Latitude 7230 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Steps 1. Align the screw holes on the USB/HDMI port with the screw holes on the tablet. 2. Replace the single screw (M2x5) to secure the USB/HDMI port to the tablet. 3. Connect the USB/HDMI port cable to the connector on the system board. 4. Align the screw holes on the USB/HDMI port bracket with the screw holes on the system board. 5. Replace the two screws (M2x3) to secure the USB/HDMI port bracket in place. 6. Adhere the conductive tape to the USB/HDMI port. Next steps 1. Install the back-cover assembly. 2. Install the batteries. 3. Install the handle (for models shipped with handle). 4. Install the stylus. 5. Follow the procedure in after working inside your tablet. 42 Removing and installing components
Steps
1.
Align the screw holes on the USB/HDMI port with the screw holes on the tablet.
2.
Replace the single screw (M2x5) to secure the USB/HDMI port to the tablet.
3.
Connect the USB/HDMI port cable to the connector on the system board.
4.
Align the screw holes on the USB/HDMI port bracket with the screw holes on the system board.
5.
Replace the two screws (M2x3) to secure the USB/HDMI port bracket in place.
6.
Adhere the conductive tape to the USB/HDMI port.
Next steps
1.
Install the
back-cover assembly
.
2.
Install the
batteries
.
3.
Install the
handle
(for models shipped with handle).
4.
Install the
stylus
.
5.
Follow the procedure in
after working inside your tablet
.
42
Removing and installing components