Dell Latitude 7230 Rugged Extreme Tablet Service Manual - Page 67
Fan and SSD heat-sink assembly, Removing the fan with SSD heat-sink
View all Dell Latitude 7230 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Steps 1. Align the screw holes on the bracket with the screw holes on the tablet. 2. Replace the two screws (M2x3) to secure the front camera and microphone assembly to the tablet. 3. Connect the front-camera FPC or microphone FPC to the connector on the system board. Next steps 1. Install the world-facing camera. 2. Install the back-cover assembly. 3. Install the batteries. 4. Install the handle (for models shipped with handle). 5. Install the stylus. 6. Follow the procedure in after working inside your tablet. Fan and SSD heat-sink assembly Removing the fan with SSD heat-sink Prerequisites 1. Follow the procedure in before working inside your tablet. 2. Remove the stylus. 3. Remove the handle (for the models shipped with a handle). 4. Remove the batteries. 5. Remove the back-cover assembly. 6. Remove the M.2 2230 solid-state drive. About this task The figure indicates the location of the SSD heat-sink and provides a visual representation of the removal procedure. Removing and installing components 67