Dell Latitude 7230 Rugged Extreme Tablet Service Manual - Page 66
Installing the front camera and microphone assembly
View all Dell Latitude 7230 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Steps NOTE: Latitude 7230 Rugged Extreme Tablet features three configurations for the front camera and microphone assembly: a. Front camera and microphone assembly b. Microphone and bracket (without front camera) c. Bracket only (without front camera and microphone) NOTE: If any component in the assembly is faulty, you must replace the entire assembly. 1. For a and b configurations, disconnect the front-camera FPC or microphone FPC from the connector on the system board. 2. Remove the two screws (M2x3) that secure the bracket to the tablet. 3. Remove the front camera and microphone assembly away from the tablet. Installing the front camera and microphone assembly Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The figure indicates the location of the front camera and microphone assembly and provides a visual representation of the installation procedure. 66 Removing and installing components