Dell Latitude 7230 Rugged Extreme Tablet Service Manual - Page 54
Installing the world-facing camera, Steps, Prerequisites
View all Dell Latitude 7230 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Steps NOTE: For models shipped with a world-facing camera. 1. Peel the gasket at the top-left side of the system-board shielding cover. 2. Remove the three screws (M2x3) that secure the camera-connector bracket to the system board. 3. Remove the camera-connector bracket away from the tablet. 4. Disconnect the world-facing camera FPC from the connector on the system board. 5. Remove the two screws (M2x3) that secure the world-facing camera to the tablet. 6. Remove the world-facing camera away from the tablet. Installing the world-facing camera Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. 54 Removing and installing components
Steps
NOTE:
For models shipped with a world-facing camera.
1.
Peel the gasket at the top-left side of the system-board shielding cover.
2.
Remove the three screws (M2x3) that secure the camera-connector bracket to the system board.
3.
Remove the camera-connector bracket away from the tablet.
4.
Disconnect the world-facing camera FPC from the connector on the system board.
5.
Remove the two screws (M2x3) that secure the world-facing camera to the tablet.
6.
Remove the world-facing camera away from the tablet.
Installing the world-facing camera
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
54
Removing and installing components