Dell OptiPlex 390 Owners Manual - Page 37
Input/Output Panel, Removing The Input/Output (I/O) Panel
View all Dell OptiPlex 390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Input/Output Panel 14 Removing The Input/Output (I/O) Panel 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the cover. 3. Remove the front bezel. 4. Remove the drive cage. 5. Unthread the I/O panel/FlyWire cable from the fan shelter clip and heat sink. 6. Disconnect the I/O panel/FlyWire cable from the system board. 7. Remove the single screw that secures the I/O panel to the chassis. 37
Input/Output Panel
14
Removing The Input/Output (I/O) Panel
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
cover
.
3.
Remove the
front bezel
.
4.
Remove the
drive cage
.
5.
Unthread the I/O panel/FlyWire cable from the fan shelter clip and heat
sink.
6.
Disconnect the I/O panel/FlyWire cable from the system board.
7.
Remove the single screw that secures the I/O panel to the chassis.
37