Dell OptiPlex 390 Owners Manual - Page 39
Installing The Input/Output (I/O) Panel
View all Dell OptiPlex 390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Installing The Input/Output (I/O) Panel 1. Insert the I/O panel into the slot on the chassis front. 2. Slide the I/O panel towards the left of the computer to secure to the chassis. 3. Tighten the screw to secure the I/O panel to the chassis. 4. Connect the I/O panel/FlyWire cable to the system board. 5. Thread the I/O panel/FlyWire cable into the fan shelter clip and the routing on the heat sink. 6. Install the drive cage. 7. Install the front bezel. 8. Install the cover. 9. Follow the procedures in After Working Inside Your Computer. 39
Installing The Input/Output (I/O) Panel
1.
Insert the I/O panel into the slot on the chassis front.
2.
Slide the I/O panel towards the left of the computer to secure to the
chassis.
3.
Tighten the screw to secure the I/O panel to the chassis.
4.
Connect the I/O panel/FlyWire cable to the system board.
5.
Thread the I/O panel/FlyWire cable into the fan shelter clip and the routing
on the heat sink.
6.
Install the
drive cage
.
7.
Install the
front bezel
.
8.
Install the
cover
.
9.
Follow the procedures in
After Working Inside Your Computer
.
39