Dell OptiPlex 390 Owners Manual - Page 78

Error Message Bad command or file name Bad error-correction code (ECC) on disk read Controller has failed Data error Decreasing available memory Gate A20 failure General failure Hard-disk drive configuration error Hard-disk drive controller failure Hard-disk drive failure Hard-disk drive read failure Invalid configuration information-please run SETUP program Invalid Memory configuration, please populate DIMM1 Description Ensure that you have spelled the command correctly, put spaces in the proper place, and used the correct path name. The hard drive controller detected an uncorrectable read error. The hard drive or the associated controller is defective. The hard drive cannot read the data. For the Windows operating system, run the chkdsk utility to check the file structure of the hard drive. For any other operating system, run the appropriate corresponding utility. One or more memory modules may be faulty or improperly seated. Re-install the memory modules and, if necessary, replace them. One or more memory modules may be faulty or improperly seated. Reinstall the memory modules and, if necessary, replace them. The operating system is unable to carry out the command. This message is usually followed by specific information-for example, Printer out of paper. Take the appropriate action to resolve the problem. The hard drive failed initialization. The hard drive failed initialization. The hard drive failed initialization. The hard drive failed initialization. The computer configuration information does not match the hardware configuration. DIMM1 slot does not recognize a memory module. The module should be re-seated or installed. 78