Dell OptiPlex 9010 AIO Owner's Manual - Page 18

Installing the Intrusion Switch, Removing the Wireless Local Area Network (WLAN) Card

Get Dell OptiPlex 9010 AIO PDF manuals and user guides View all Dell OptiPlex 9010 AIO manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Installing the Intrusion Switch 1. Place the intrusion switch on the computer and tighten the screw to secure it to the chassis. 2. Thread the cable along the notches on the chassis and connect the intrusion switch to the connector on the system board. 3. Install: a) system-board shield b) VESA mount bracket c) back cover d) VESA stand 4. Follow the procedures in After Working Inside Your Computer. Removing the Wireless Local Area Network (WLAN) Card 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) VESA stand b) back cover c) VESA mount bracket d) system-board shield 3. Disconnect the WLAN cables. Remove the screws that secure the WLAN card to the system board. Remove the WLAN card from the connector. 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
Installing the Intrusion Switch
1.
Place the intrusion switch on the computer and tighten the screw to secure it to the chassis.
2.
Thread the cable along the notches on the chassis and connect the intrusion switch to the connector on the system
board.
3.
Install:
a)
system-board shield
b)
VESA mount bracket
c)
back cover
d)
VESA stand
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Wireless Local Area Network (WLAN) Card
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
VESA stand
b)
back cover
c)
VESA mount bracket
d)
system-board shield
3.
Disconnect the WLAN cables. Remove the screws that secure the WLAN card to the system board. Remove the
WLAN card from the connector.
18