Dell OptiPlex 9010 AIO Owner's Manual - Page 27

Installing the Processor Fan, Removing the Processor, Installing the Processor

Get Dell OptiPlex 9010 AIO PDF manuals and user guides View all Dell OptiPlex 9010 AIO manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

Installing the Processor Fan 1. Place the processor fan on the computer and tighten the screws to secure the processor fan to the system board. 2. Connect the processor-fan cable to the connector on the system board. 3. Install: a) system-board shield b) VESA mount bracket c) back cover d) VESA stand 4. Follow the procedures in After Working Inside Your Computer. Removing the Processor 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) VESA stand b) back cover c) VESA mount bracket d) system-board shield e) heat-sink assembly 3. Press the release lever down and then move it outward to release it from the retention hook that secures it. Lift the processor cover and remove the processor from its socket. Installing the Processor 1. Insert the processor into the processor socket. Ensure the processor is properly seated. 2. Press the release lever down and then move it inward to secure it with the retention hook. 3. Install: a) heat-sink assembly b) system-board shield c) VESA mount bracket d) back cover e) VESA stand 4. Follow the procedures in After Working Inside Your Computer. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
Installing the Processor Fan
1.
Place the processor fan on the computer and tighten the screws to secure the processor fan to the system board.
2.
Connect the processor-fan cable to the connector on the system board.
3.
Install:
a)
system-board shield
b)
VESA mount bracket
c)
back cover
d)
VESA stand
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Processor
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
VESA stand
b)
back cover
c)
VESA mount bracket
d)
system-board shield
e)
heat-sink assembly
3.
Press the release lever down and then move it outward to release it from the retention hook that secures it. Lift the
processor cover and remove the processor from its socket.
Installing the Processor
1.
Insert the processor into the processor socket. Ensure the processor is properly seated.
2.
Press the release lever down and then move it inward to secure it with the retention hook.
3.
Install:
a)
heat-sink assembly
b)
system-board shield
c)
VESA mount bracket
d)
back cover
e)
VESA stand
4.
Follow the procedures in
After Working Inside Your Computer
.
27