Dell OptiPlex GL Service Manual - Page 21
Main Memory, System Board Jumpers,
View all Dell OptiPlex GL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Main Memory The four DIMM sockets on the system board can accommodate combinations of 16-, 32-, 64-, and 128-MB DIMMs up to a total memory capacity of 512 MB. The system is shipped with high-speed (60-ns) EDO DIMMs that provide ECC functionality when used with the Intel 82440FX PCIset. EDO parity mode DIMMs can be mixed, as follows: • Any socket can be populated or not. There is no requirement that one socket be filled before the other, and empty sockets can be left between installed DIMMs. Dell recommends populating the sockets in order from A to D. • Each DIMM socket does not have to contain DIMMs of the same size or speed. DIMMs may be installed in any order. See "DIMMs" in Chapter 4 for information on removing and replacing DIMMs. System Board Jumpers jumpered unjumpered Figure 1-11. System Board Jumpers System Overview 1-13