Dell OptiPlex GL Service Manual - Page 44
Warning, Temperature, is too high, Write fault, on selected, drive, continued
View all Dell OptiPlex GL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Table 3-2. System Error Messages (continued) Message Definition Probable Causes WarningTemperature is too high At system start-up, BIOS detected that one or both microprocessors have overheated. One or both microprocessors are too hot. Write fault Write fault on selected drive MS-DOS cannot write to diskette or hard-disk drive. Faulty diskette or harddisk drive. 3-10 Dell OptiPlex GXpro Systems Service Manual
3-10
Dell OptiPlex GX
pro
Systems Service Manual
Warning-
Temperature
is too high
At system start-up,
BIOS detected that
one or both micro-
processors have
overheated.
One or both micro-
processors are too hot.
Write fault
Write fault
on selected
drive
MS-DOS cannot write
to diskette or hard-disk
drive.
Faulty diskette or hard-
disk drive.
Table 3-2.
System Error Messages
(continued)
Message
Definition
Probable Causes