Dell Precision R5400 Remote Access Device: Administrator's User Manual& - Page 18
Enable DHCP, 5.1.2 IP Address, 5.1.3 Subnet Mask
View all Dell Precision R5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
TERA1x00 PC-over-IP Administrative Interface User Manual Figure 4: Network Configuration Webpage TER0606004 Issue 3 1.5.1.1 Enable DHCP When the Enable DHCP option is enabled, the device will contact a DHCP server to be assigned an IP address, subnet mask, gateway IP address and DNS servers. When disabled, the device requires these parameters to be set manually. 1.5.1.2 IP Address The IP Address is the device's IP address. If DHCP is disabled, this field is required. If DHCP is enabled, this field is not editable. This field must be a valid IP address, and if an invalid IP address is entered, the web interface will prompt the administrator to correct it. 1.5.1.3 Subnet Mask The Subnet Mask is the device's subnet mask. If DHCP is disabled, this field is required. If DHCP is enabled, this field is not editable. This field must be a valid IP address, and if an invalid IP address is entered, the web interface will prompt the administrator to correct it. Warning: It is possible to configure an illegal IP Address/Subnet Mask combination (e.g. invalid mask) that will leave the Host unreachable. Care must be taken when setting the Subnet Mask. © 2008 Teradici Corporation Page 18 of 111