Dell Precision R5400 Remote Access Device: Administrator's User Manual& - Page 88

DHCP and Enable Host Discovery Example

Get Dell Precision R5400 PDF manuals and user guides View all Dell Precision R5400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

TERA1x00 PC-over-IP Administrative Interface User Manual Figure 66: Peer-to-Peer Connect Screen TER0606004 Issue 3 2. When connected, the Host computer is ready to use over PC-over-IP 4.2 DHCP and Enable Host Discovery Example This example covers configuring the Portal and Host for use with a DHCP server and the Host Discovery feature without the use of a Connection Management Server. The following starting IP addresses are used for this example: • Portal: IP Address: 192.168.0.111 • Host: IP Address: 192.168.1.222 Note: To configure for DHCP and Host Discovery, it is required to know the IP address of the Portal and Host regardless if it is set as statically or dynamically. 4.2.1 Portal DHCP and Discovery Configuration Note: Although this example uses the Administration Web Interface for configuring the Portal for DHCP and Host Discovery operation, the Portal OSD may also be used to configure the Portal. See Section 2 On Screen Display (OSD) for matching OSD functionality. Configure the Portal for DHCP and Discovery: 1. Open the Portal Administration Web Interface by using an internet browser to open the Portal IP address, e.g. https://192.168.0.111 © 2008 Teradici Corporation Page 88 of 111

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
TERA1x00 PC-over-IP Administrative Interface User Manual
TER0606004 Issue 3
© 2008 Teradici Corporation
Page 88 of 111
Figure 66: Peer-to-Peer Connect Screen
2.
When connected, the Host computer is ready to use over PC-over-IP
4.2 DHCP and Enable Host Discovery Example
This example covers configuring the Portal and Host for use with a DHCP server and
the Host Discovery feature without the use of a Connection Management Server.
The following starting IP addresses are used for this example:
•
Portal: IP Address: 192.168.0.111
•
Host:
IP Address: 192.168.1.222
Note: To configure for DHCP and Host Discovery, it is required to know the IP
address of the Portal and Host regardless if it is set as statically or dynamically.
4.2.1
Portal DHCP and Discovery Configuration
Note: Although this example uses the Administration Web Interface for configuring
the Portal for DHCP and Host Discovery operation, the Portal OSD may also be used
to configure the Portal.
See Section 2 On Screen Display (OSD) for matching OSD
functionality.
Configure the Portal for DHCP and Discovery:
1.
Open the Portal Administration Web Interface by using an internet browser to
open the Portal IP address, e.g.