Dell Precision R5400 Remote Access Device: Administrator's User Manual& - Page 55
OSD Logo
View all Dell Precision R5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
TERA1x00 PC-over-IP Administrative Interface User Manual TER0606004 Issue 3 1.9.1.2 Upload Selecting the Upload button will cause the specified file to be transferred to the device. The web interface will prompt the administrator for confirmation to avoid accidental uploads. Example Firmware Upload Process: 1. First upload the Firmware on the Portal by logging into the Portal Administration Web Interface 2. Select the webpage Browse button to browse to the firmware '.all' file, e.g. tera1x00_rel0-19_v112.all 3. Select the File Upload window Open button 4. Select the webpage Upload button 5. Select the webpage OK button on the 'Are you sure? This will upload a new firmware image. This operation may take a few minutes' warning window. 6. Wait for the firmware upload to complete. The following message appears when complete, "Success Flash successfully programmed! You must reset the device for the changes to take effect." 7. Reset the Portal 8. Repeat for the Host Note: Ensure both the Portal and Host have the same firmware and bootloader release uploaded. 1.9.2 OSD Logo The OSD Logo webpage allows the upload of an image to the device. This image is displayed on the connect window of the local GUI On Screen Display (OSD) Logo. This option is only available on a Portal; on the Host it is disabled and non-editable. © 2008 Teradici Corporation Page 55 of 111