Epson BrightLink 710Ui Users Guide - Page 263

On/Standby light Off Status light Laser light Temp light Flashing blue Orange Off Off Flashing blue Off Flashing orange Off Flashing blue Flashing Off orange Flashing blue Varies Flashing orange Flashing orange Off Flashing blue Orange Orange Status and solution Laser has a problem. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects. • Clean or replace the air filter. • If the problem persists, unplug the projector and contact Epson for help. A fan or sensor has a problem. Turn the projector off, unplug it, and contact Epson for help. Internal projector error. Turn the projector off, unplug it, and contact Epson for help. Obstacle detection warning. A beep sounds and you see an obstacle warning. The projector turns off automatically if you take no action. • Remove any obstacles interfering with the projection window. • Clean the obstacle sensor. If the problem persists, turn the projector off, unplug it, and contact Epson for help. Obstacle detection error. Turn the projector off, unplug it, and contact Epson for help. Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help. Parent topic: Solving Problems 263