Epson BrightLink 710Ui Users Guide - Page 269
Solutions When the Image is Not Rectangular, Projection, Image Shift, Parent topic, Related references
View all Epson BrightLink 710Ui manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
• Check the resolution assigned to your presentation files to see if they are created for a different resolution than you are projecting in. (See your software help for details.) • Make sure you selected the correct Projection setting. • Try adjusting the image position using the Image Shift setting. • If you are passing the video signal through another device, make sure the device is set up correctly, then try connecting the video source directly to the projector. Parent topic: Solving Image or Sound Problems Related references Input Signal Settings - Signal Menu Related tasks Changing the Image Aspect Ratio Zooming Into and Out of Images Solutions When the Image is Not Rectangular If the projected image is not evenly rectangular, try the following solutions: • If the projector is not mounted on the wall or ceiling, place it directly in front of the center of the screen, facing it squarely, if possible. • Use the Image Shift setting to adjust the image position, rather than moving the projector. • Press the keystone buttons on the projector to adjust the image shape. • Adjust the image shape using the Geometry Correction menu settings. Note: Adjusting Quick Corner, H/V-Keystone, and Arc Correction settings may affect focus and pen calibration. Note: If the projector is mounted on the wall, always use the adjustment dials on the mount to center the image. Parent topic: Solving Image or Sound Problems Related tasks Correcting Image Shape with the Keystone Buttons Correcting Image Shape with Quick Corner Correcting Image Shape with Arc Correction 269