Epson BrightLink 710Ui Users Guide - Page 277
Solutions When You Cannot Access the Projector Through the Web
View all Epson BrightLink 710Ui manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 277 highlights
Related references Projector Network Settings - Network Menu Event ID Code List Solutions When You Cannot Access the Projector Through the Web If you are unable to access the projector through a web browser, make sure you are using the correct ID and password, which are case sensitive. Note: You cannot change the user ID. • You may need to log in to access some options on the Web Control screen. If you see a log in window, enter EPSONWEB as the user ID and enter the password set in the projector's Network menu as the password. The default password is admin. • To display the Web Remote screen, enter EPSONREMOTE as the user ID and enter the password set in the projector's Network menu as the password. The default password is guest. • Avoid connecting via a proxy server. • Make sure you have access to the network the projector is on. • Check the IP address on the projector, then reenter the IP address in the browser search bar. Note: The user ID and password are case sensitive. Parent topic: Solving Network Problems Solutions When Network Alert E-Mails are Not Received If you do not receive an e-mail alerting you to problems with a projector over the network, try the following solutions: • Make sure the projector is turned on and connected to the network correctly. (If an error shut down the projector, it cannot send an e-mail.) • Make sure your electrical outlet or power source is functioning properly. • Make sure you set up the projector e-mail alert settings correctly on the projector's network Notifications menu or in the network software. • Set the Standby Mode setting to Communication On so the network software can monitor the projector in standby mode. Change the Port setting according to your network environment. Parent topic: Solving Network Problems 277