Epson BrightLink 710Ui Users Guide - Page 278

Related references Network Projector E-mail Alert Messages Related tasks Setting Up Projector Network E-Mail Alerts Solutions When the Image Contains Static During Network Projection If the projected image contains static during network projection, try the following solutions: • Check for any obstacles between the access point, the computer, the mobile device, and the projector. If necessary, change their positions to improve communication. Also make sure that they are not too far apart; move them closer together and try to connect again. • If the wireless connection is slow or your projected image contains noise, check for interference from other equipment, such as a Bluetooth device or microwave. Move the interfering device farther away or expand your wireless bandwidth. • If the connection speed declines, reduce the number of connected devices. Parent topic: Solving Network Problems Solving Interactive Problems Check the solutions in these sections if you have problems using the interactive system. Note: If the "Error occurred in the Easy Interactive Function" message appears, contact Epson for help. Solutions When "Error Occurred in the Easy Interactive Function" Message Appears Solutions When the Interactive Pens Do Not Work Solutions When the Interactive Pen Position Is Not Accurate Solutions When Manual Calibration Does Not Work Solutions When the Interactive Pens Are Slow or Difficult to Use Solutions When the Interactive Pens Cause Interference or Unwanted Effects Solutions When Finger Touch Interactivity Does Not Work Solutions When You Cannot Operate a Computer from the Projected Screen Solutions When Inking Does Not Appear in Microsoft Office Solutions When the Pen Does Not Work Over a Network or the Toolbars Do Not Appear Parent topic: Solving Problems 278