Epson BrightLink 710Ui Users Guide - Page 296

Laser Safety Information This projector is a Class 3R laser product that complies with the IEC/EN60825-1:2007 international standard for lasers. Follow these safety instructions when using the projector. Warning: Possibly hazardous optical radiation emitted from this product. Do not look at operating light source. Eye injury may result. • If an error occurs in the projector or Touch Unit, turn off the power and unplug the projector and Touch Unit immediately. Continuing to use the projector or Touch Unit could result in an electric shock, fire, or visual impairment. Contact Epson support. • Do not attempt to disassemble or modify the projector or Touch Unit. The projector contains a highpower laser component. Serious injury could result. • Do not look into the lens during projection. Also, do not look into the lens using optical devices, such as a magnifying glass or telescope. This could cause visual impairment. • When turning on the projector at a distance using the remote control, make sure no one is looking into the lens. • Do not allow small children to operate the projector. Children must be accompanied by an adult. • Do not apply optical devices, such as a magnifying glass or reflector, to the projected image. Using the projector may result in physical harm, fire, or an accident. • Before using the projector, make sure there is nothing in the area that could reflect the projected image. • When disposing of the projector, do not disassemble it. Dispose of the projector in accordance with your local or national laws and regulations. Labels are attached to the projector to indicate it is a Class 3R product and complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice N. 50, dated June 24, 2007: • Inside 296