Epson ColorWorks CW-C6000P Users Manual - Page 42
How to Load Paper (Auto Cutter Model - Supply from Outside), on the operation panel.
View all Epson ColorWorks CW-C6000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Basic Operation How to Load Paper (Auto Cutter Model - Supply from Outside) 1 Turn on the printer, and then check that [Rear Feed] is selected as the [Media Source] setting on the operation panel. (U"Checking the Paper Information" on page 27) 2 Open the paper cover. 4 Place the fanfold paper behind the printer. • Place the fanfold paper at least 100 mm away from the printer. • Make sure the paper is vertical in relation to the paper feed slot. 3 Remove the spindle, if present. As shown in the figure, hold the spindle and flange with both hands, and remove them. 100 mm or more CAUTION Make sure not to let the fanfold paper to curl near the printer. Doing so will deform the paper resulting in a paper jam or a print quality problem. 42
Basic Operation
42
How to Load Paper (Auto Cutter Model - Supply from Outside)
1
Turn on the printer, and then check that [Rear
Feed] is selected as the [Media Source] setting
on the operation panel.
(
U
"Checking the Paper Information" on page 27
)
2
Open the paper cover.
3
Remove the spindle, if present.
As shown in the figure, hold the spindle and flange with
both hands, and remove them.
4
Place the fanfold paper behind the printer.
•
Place the fanfold paper at least 100 mm away from
the printer.
•
Make sure the paper is vertical in relation to the
paper feed slot.
CAUTION
Make sure not to let the fanfold paper to curl near the
printer. Doing so will deform the paper resulting in a
paper jam or a print quality problem.
100 mm or
more