Epson ColorWorks CW-C6000P Users Manual - Page 54

Cleaning the Auto Cutter (Auto Cutter Model Only

Get Epson ColorWorks CW-C6000P PDF manuals and user guides View all Epson ColorWorks CW-C6000P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

Maintenance Cleaning the Auto Cutter (Auto Cutter Model Only) If labels, paper dust, or adhesive has adhered to the fixed blade of the auto cutter, the blade may become dull. Clean the fixed blade following the procedure below. Fixed blade 1 If paper has been loaded, remove it. (U"How to Remove Paper (For the Auto Cutter Model)" on page 48) 2 Turn off the printer, and unplug the power cable. 3 As shown in the figure below, scrape off adhered materials stuck to the fixed blade using a flat-blade screwdriver (blade width: 1.8 mm to 3 mm). Start scraping from each end toward the center. Keep the blade upright while cleaning the auto cutter. Keep the blade in contact with the bottom of the paper ejection slot. 54

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
Maintenance
54
Cleaning the Auto Cutter (Auto Cutter Model Only)
If labels, paper dust, or adhesive has adhered to the fixed blade of the auto cutter, the blade may become dull.
Clean the fixed blade following the procedure below.
1
If paper has been loaded, remove it.
(
U
"How to Remove Paper (For the Auto Cutter Model)" on page 48
)
2
Turn off the printer, and unplug the power cable.
3
As shown in the figure below, scrape off adhered materials stuck to the fixed blade
using a flat-blade screwdriver (blade width: 1.8 mm to 3 mm). Start scraping from
each end toward the center.
Fixed blade
Keep the blade upright while cleaning the
auto cutter.
Keep the blade in contact with the bottom
of the paper ejection slot.