Epson ColorWorks CW-C6000P Users Manual - Page 59
Cleaning the Paper Pressure Roller
View all Epson ColorWorks CW-C6000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Maintenance Cleaning the Paper Pressure Roller If paper dust or adhesive has adhered to the paper pressure roller, paper may get jammed, or faint or blurred image may be printed. Clean the roller following the procedure below. 4 Raise the release lever. CAUTION When cleaning the paper pressure roller, do not use a material other than labels. Doing so may damage the roller resulting in paper jam, or faint or blurred printout. 1 Check that the printer has been turned off. 2 Open the paper cover. If paper has been loaded, remove it. (U"How to Remove Paper (For the Auto Cutter Model)" on page 48, "How to Remove Paper (For the Peeler Model)" on page 49) 5 Open the front cover. 6 Attach adhesive side of a label to the roller, and peel it off slowly. Repeat this action until paper dust or adhesive is completely removed from side to side of the roller. If some labels have stuck on the roller, carefully remove them as they can cause a paper jam. 3 Remove the spindle. 7 Rotating the roller by hand, remove paper dust or adhesive from entire surface of the roller. 59