Epson ColorWorks CW-C6000P Users Manual - Page 65
For the Peeler Model, Lower the release lever.
View all Epson ColorWorks CW-C6000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
For the Peeler Model 1 Open the peeler cover. Troubleshooting 6 Open the paper cover. 2 Cut the paper near the paper ejection slot. 7 Raise the release lever. 3 Open the front cover. 8 Pull the paper out from the paper feed slot. 4 If there are ripped pieces of paper on the platen, remove them. 5 If the print head is not on the far right, hold it down and move it to the far right. If there is jammed paper, remove it. 9 Lower the release lever. 10 Close the paper cover. 11 Close the front cover. 12 Close the peeler cover. 13 Press the Pause button. The paper jam error will be cleared. To resume printing, load the paper again. (U"How to Load Paper (Peeler Model - Supply from Inside)" on page 45) 65
Troubleshooting
65
For the Peeler Model
1
Open the peeler cover.
2
Cut the paper near the paper ejection slot.
3
Open the front cover.
4
If there are ripped pieces of paper on the
platen, remove them.
5
If the print head is not on the far right, hold it
down and move it to the far right.
If there is jammed paper, remove it.
6
Open the paper cover.
7
Raise the release lever.
8
Pull the paper out from the paper feed slot.
9
Lower the release lever.
10
Close the paper cover.
11
Close the front cover.
12
Close the peeler cover.
13
Press the Pause button.
The paper jam error will be cleared.
To resume printing, load the paper again.
(
U
"How to Load Paper (Peeler Model - Supply from
Inside)" on page 45
)