Epson ColorWorks CW-C6000P Users Manual - Page 45
How to Load Paper (Peeler Model - Supply from Inside
View all Epson ColorWorks CW-C6000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Basic Operation How to Load Paper (Peeler Model - Supply from Inside) 1 Turn on the printer, and then check that [Internal] is selected as the [Media Source] setting on the operation panel. (U"Checking the Paper Information" on page 27) 2 Open the paper cover. 5 Hold the spindle with both hands, and set it in the printer. Install the spindle so that both ends of the spindle fit into the holders inside the printer. 3 Remove the spindle from the printer. As shown in the figure, hold the spindle and flange with both hands, and remove them. 6 Slide the movable edge guide to the right side. Squeeze the blue lever to move the edge guide. 7 Pull the paper along the left edge guide. 4 Load the roll paper on the spindle and fix it with the flange. • To move the flange, squeeze the two levers. • When loading the roll paper on the spindle, take note of the winding direction. The correct winding direction is marked on the spindle. • Fix the flange and roll paper so that there is no gap in between. 45