Epson ColorWorks CW-C6000P Users Manual - Page 63

For the Auto Cutter Model, How to Load Paper Auto Cutter Model - Supply, from Inside

Get Epson ColorWorks CW-C6000P PDF manuals and user guides View all Epson ColorWorks CW-C6000P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

For the Auto Cutter Model 1 Cut the paper near the paper ejection slot. 5 Open the paper cover. Troubleshooting 2 Open the front cover. 6 Raise the release lever. 3 If there are ripped pieces of paper on the platen, remove them. 7 Pull the paper out from the paper feed slot. 4 If the print head is not on the far right, hold it down and move it to the far right. If there is jammed paper, remove it. 8 Lower the release lever. 9 Close the paper cover. 10 Close the front cover. 11 Press the Pause button. The paper jam error will be cleared. To resume printing, load the paper again. (U"How to Load Paper (Auto Cutter Model - Supply from Inside)" on page 40, "How to Load Paper (Auto Cutter Model - Supply from Outside)" on page 42) 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
Troubleshooting
63
For the Auto Cutter Model
1
Cut the paper near the paper ejection slot.
2
Open the front cover.
3
If there are ripped pieces of paper on the
platen, remove them.
4
If the print head is not on the far right, hold it
down and move it to the far right.
If there is jammed paper, remove it.
5
Open the paper cover.
6
Raise the release lever.
7
Pull the paper out from the paper feed slot.
8
Lower the release lever.
9
Close the paper cover.
10
Close the front cover.
11
Press the Pause button.
The paper jam error will be cleared.
To resume printing, load the paper again.
(
U
"How to Load Paper (Auto Cutter Model - Supply
from Inside)" on page 40
,
"How to Load Paper (Auto
Cutter Model - Supply from Outside)" on page 42
)