Epson LQ 870 User Manual - Page 20
CAUTION, Setting Up the Printer, then press on both ends of the cartridge to fit the plastic hooks - ribbon how to
View all Epson LQ 870 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Assembling the Printer CAUTION: Never move the print head while the printer is turned on or you might damage the printer. Also, if you just used the printer, the print head may be hot; let it cool for a few minutes before touching it. 4. Turn the ribbon-tightening knob in the direction of the arrow to remove any slack in the ribbon. Next, hold the ribbon cartridge by its handle and push it firmly down into position; then press on both ends of the cartridge to fit the plastic hooks 5. Use a pointed object, such as a ball point pen, to guide the ribbon between the print head and ribbon guide while you turn the ribbon-tightening knob to help feed the ribbon into place. Setting Up the Printer 1-7
Assembling the Printer
CAUTION:
Never move the print head while the printer
is turned on or you might damage the printer. Also, if
you just
used
the printer, the print head may be hot; let
it cool for a few minutes before touching it.
4.
Turn the ribbon-tightening knob in the direction of the arrow
to remove any slack in the ribbon. Next, hold the ribbon
cartridge by its handle and push it firmly down into position;
then press on both ends of the cartridge to fit the plastic hooks
5.
Use a pointed object, such as a ball point pen, to guide the
ribbon between the print head and ribbon guide while you
turn the ribbon-tightening knob to help feed the ribbon into
place.
Setting Up the Printer
1-7