Epson LQ 870 User Manual - Page 27
Connecting the Printer to Your Computer, connector beneath the interface connector.
View all Epson LQ 870 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Connecting the Printer to Your Computer If the self test printed correctly, you are ready to connect your printer to the computer. Use a shielded twisted-pair parallel cable to connect your computer to your printer's built-in parallel interface. Connect the parallel interface cable as described below: 1. Make sure both the printer and computer are turned off; then plug the cable connector securely into the printer. Squeeze the wire clips together until they lock in place on either side of the connector. Note: If your cable has a ground wire, attach it to the ground connector beneath the interface connector. 2. Plug the other end of the cable into the computer. (If there is a ground wire at the computer-end of the cable, attach it to the ground connector at the back of the computer.) 1-14 Setting Up the Printer